Using a Broadcast Spreader

There are a few advantages to using a broadcast spreader over a drop spreader, especially if you have a larger yard or area that you are working with. The broadcast spreader has a larger area that it spreads over vs. a drop spreader, so it will cut the time you spend spreading down.

If you are using your broadcast spreader for spreading grass seed you will find that it works much better for certain grasses than a drop spreader does. With the drop spreader some grasses will grow in streaks instead of throughout the entire yard.

There are a variety of these types of spreader on the market, many are push spreaders, but if you have a very large area to cover you may want to look into investing in an ATV spreader.

To use your broadcast spreader you will first want to read your instructions thoroughly. As well as the instructions on the fertilizer or seed that you are spreading. The seed/fertilizer should have instructions on them for the recommended speed rate.

It is advised to do a test run with a small amount of your seed or fertilizer on a clean sidewalk or driveway so that you can ensure that you have the correct settings. You will want to make a note of how far the spreader distributes on different settings and write it down for future reference. Be sure to make note of how much product you put into the spreader and how large of an area it covered. Then compare this to how much coverage the product packaging states that you should have. If it doesn't cover enough area or covers too much then you will need to readjust your settings.

Collect your product so that you can reuse it. Do not just sweep or spray off into the yard.

Now you can fill up your spreader with the recommended amount of seed or fertilizer for the area that you need to cover. You will want to walk in a pattern that allows you enough space to only cover about 6 inches of the same area, this is okay to do since the outer edges of your spraying will receive less material. Usually the best pattern to spread in will be a row pattern.

Have more tips on using a broadcast spreader? Please share them with us in the comments.